WGS84/NAD27 converter
Most on-line map services and GPS's use the WGS84 datum, but the USGS topo maps are published in the NAD27 datum. The 1 kilometer UTM grid on the 7.5' quads is useful for off-trail adventures. Use a yardstick to draw in the grid lines (see example), then set your GPS readouts to NAD27 and UTM.

WGS84 NAD27
36.13975-84.06383 36.139659-84.063925
36° 8.3850'84° 3.8298' 36° 8.3795'84° 3.8355'
36° 8' 23.10"84° 3' 49.79" 36° 8' 22.77"84° 3' 50.13"
764198E 4003443N 16 764196E 4003232N 16

    show maps for this location (WGS84) Google topo

 

With the form below you can convert between lat/lon and UTM and between the WGS84 and NAD27 datums. Latitude/longitude can be represented as 36.12345, or 36 44.333, or 36 22 14.5 and degree, minute, seconds symbols will be ignored.

Latitude: Longitude:
     

 

  UTM Easting: Northing: Zone:
     

 

  NABSQNO: WGS84 UTM (Z-E-N), e.g. 16S-598278-3890594
     

Tennessee landforms     home     waterfalls     arches     rocks     peaks     balds     lakes     regions     county
Tennessee lookout towers or county high points
GSMNP landforms     GSMNP campsites     BSF landforms     AT shelters